11.2 Trunking System
You can configure the following items in a Trunking
system.
•
Time-out Timer (Dispatch)
•
Time-out Timer (Telephone)
11.2.1 Time-out Timer (Dispatch)
The Time-out Timer (Dispatch) restricts the continuous
transmission when a user communicates with the
Dispatcher ID.
The transceiver pauses the transmission and emits the
Warning Tone when attempting to transmit after the
configured Time-out Timer (Dispatch) expires. The
transceiver emits the Warning Tone until the PTT switch is
released.
You can configure the Time-out Timer (Dispatch) using
KPG-89D.
Note:
" The transceiver returns to normal receiving mode after the EOT
expires if it pauses the transmission in FleetSync, etc.
" This function does not work in Emergency Mode.
!
Configuration using KPG-89D
•
Configuring the Time-out Timer (Dispatch) (Refer
to FPRG 6.5.8 Time-out Timer (Dispatch).)
11.2.2 Time-out Timer (Telephone)
The Time-out Timer (Telephone) restricts the continuous
transmission when a user communicates with the
Telephone ID.
The transceiver pauses the transmission and emits the
Warning Tone when attempting to transmit after the
configured Time-out Timer (Dispatch) expires. The
transceiver emits the Warning Tone until the PTT switch is
released.
You can configure the Time-out Timer (Telephone) using
KPG-89D.
Note:
" The transceiver returns to normal receiving mode after the EOT
expires if it pauses the transmission in FleetSync, etc.
" This function does not work in Emergency Mode.
!
Configuration using KPG-89D
•
Configuring the Time-out Timer (Telephone)
(Refer to FPRG 6.5.9 Time-out Timer
(Telephone).)
Version: 1.11
Function Reference
11 TIME-OUT TIMER
45