Home Ch/Gid - Kenwood TK-3180 Function Reference

2 BASIC OPERATION
Note:
" When no key is pressed before the Mode Reset Timer
expires in Channel Entry Mode, the display returns to the
last display.
" When the unregistered channel is entered , the transceiver
specifies the channel used before the transceiver enters
Channel Entry Mode.
" Although scan pauses when changing the channel during
scan, the transceiver resumes scanning in 1 second.
" When the transceiver receives a call on the previous
channel while entering the channel number, the transceiver
emits the received tone in Channel Entry Mode. You can
move to a new channel after receiving a call.
" Following are the operations of key operations while
entering the channel number.
Table 2-1 Key Operation
Key Name
Up/Down of the Channel
* List Selection Key (Selector) is
Selector/ [ ]/ [ ]
enabled.
Exit mode.
[Side 1]/ [ ]
[S] Confirm the channel number.
[A] Delete a character.
[B]
[C]
[Side 2]/ [!]
[0] - [9] Enter the number.
[*] Confirm the CH/GID.
[#] Delete a character.
PTT switch
!
Configuration using KPG-89D
•
Assigning functions to the PF keys (Refer to 6.8
Key Assignment.)
2.7

Home CH/GID

This function allows you to jump to the frequently used
CH/GID with a press of a key. You can jump to the CH/
GID in the same Zone.
You can change the Home CH/GID using the PF key
when the Operator Selectable function is enabled with
KPG-89D.
You can configure the Home CH/GID using KPG-89D.
Note: Refer to Scan Function for the operations when the PF
Home CH/ GID key is pressed during scan.
14
Operation
Function Reference
!
Transceiver Operation
# Jumping to the Home Channel/Group ID
1. Press the Home CH/GID key.
"HC" appears on the Sub display and the
transceiver jumps to the Home CH/GID in the
selected Zone.
TK-2180/ 3180
TK-7180/ 8180
# Returning to the previous CH/GID
1. Press the PF Home CH/GID key on the Home
CH/GID.
The transceiver returns to the previous CH/GID
and "HC" on the Sub display disappears.
TK-2180/ 3180
TK-7180/ 8180
Version: 1.11