Key Assignment; Available Functions; Assigning Functions To The Pf Keys - Kenwood TK-3180 Function Reference

10 KEY ASSIGNMENT

You can assign functions to the Selector and the PF
keys.
!
Configuration using KPG-89D
• Assigning functions to the Selector and PF keys
(Refer to FPRG 6.8 Key Assignment.)

10.1 Available Functions

(TK-2180/ 3180 only)
You can assign functions to the Selector keys using
KPG-89D.
You can configure these functions to the TK-2180/ 3180
only.
Table 10-1 Assigning Functions to the Selector
Function Name
The repeater does not perform any
None operation. The Key-entry Error Tone
sounds when the None key is pressed.
Turn the Selector to increase/decrease
CH/GID Up/Down
the CH/GID in steps of 1.
Turn the Selector to increase/decrease
Zone Up/Down
the Zone number in steps of 1.
10.2 Assigning Functions to the
PF Keys
You can assign functions to the PF keys using KPG-89D.
Table 10-2 Available Functions
Function Name
The repeater does not perform any
None operation. The Key-entry Error Tone
sounds when the None key is pressed.
The transceiver sends the 2-tone code
configured in the 2-tone Encode List Call 2
2-tone
when the key is pressed.
tone.)
The transceiver sends the DTMF code
Autodial configured in the DTMF Autodial List when
the key is pressed.
Press the PF Autodial Programming key
Autodial to configure, change, or delete the DTMF
Programming Autodial List.
Programming.)
Version: 1.11
Description
Description
(Refer to 21 2-
(Refer to 20 DTMF.)
(Refer to 20.4.2 Autodial
Function Reference
Function Name
Press the PF Auto Reply Message key to
switch the Auto Reply Message On/Off
Auto Reply
when the VGS-1 is installed to the
Message
transceiver.
Message.)
Press the PF Auto Telephone key to
search the RIC repeater and automatically
Auto Telephone
connect to the telephone.
17.1.14 Auto Telephone Search.)
The AUX Output terminal becomes active/
inactive when the PF AUX key is pressed.
A user can control the external device
connected to the AUX port since the port
AUX
output varies in conjunction with the AUX
key.
This function is available only for the TK-
2180/ 3180.
The AUX A Output terminal becomes
active/inactive when the PF AUX A key is
pressed. A user can control the external
device connected to the AUX A port since
AUX A
the port output varies in conjunction with
the AUX A key.
This function is available only for the TK-
7180/ 8180.
The AUX B Output terminal becomes
active/inactive when the PF AUX B key is
pressed. The user can control the external
device connected to the AUX B port since
AUX B
the port output varies in conjunction with
the AUX B key.
This function is only available for the TK-
7180/ 8180.
You can send FleetSync Status, DTMF
code, and 2-tone code by pressing one of
Call 1/2/3/4/5/6
PF Call 1 - Call 6 keys.
Key.)
Press the PF CH/GID Down key to
decrease the CH/GID in steps of 1. Press
and hold this key for more than 1 second
CH/GID Down
to decrease the CH/GID number in steps
of 1 every 200 ms
the CH/GID.)
Press the PF CH/GID UP key to increase
the CH/GID in steps of 1. Press and hold
this key for more than one second to
CH/GID Up
increase the CH/GID number in steps of 1
every 200 ms.
CH/GID.)
You can directly specify the channel
number using the Keypad of the TK-2180/
Channel Entry
3180 or the microphone of the TK-7180/
8180. (Refer to 2.6 Channel Entry.)
Press the PF CH/GID Recall key to move
CH/GID Recall to the Last Called Zone-CH/GID during
scan. (Refer to 23.7.16 CH/GID Recall.)
Press the PF Clock key to display the
Clock
clock. (Refer to 30 CLOCK.)
Press the PF Direct CH/GID 1 - 5 key to
Direct CH/GID
move to the registered CH/GID.
1 - 5
2.8 Direct CH/GID.)
Description
(Refer to 31.3 Auto Reply
(Refer to
(Refer to 1.11 Call
(Refer to 2.5 Changing
(Refer to 2.5 Changing the
(Refer to
41