Basic Functions; Turning On The System; Switching Off In Standby; Volume Control - Kenwood CR-ST50DAB Operating Instructions Manual

Basic functions

Turn on the radio: Press the button
Switching off in standby Press and hold the button
"Standby" and the device switches to standby mode. The time will still be displayed.

Volume control

Turn the "VOL" knob to increase or decrease the volume. The selected volume is displayed
graphically.
Navigate in menus
Selecting a menu item or setting numbers is done by turning the <TUNE/AUTO/ENTER/uII> knob,
confirm by pressing. By pressing the <MENU> key, the respective menu is exited again. The set values
are sometimes indicated by a "*" after the menu name.

Setting the menu language

1. Turn on the radio and use the
2. Press the <MENU>, button, select the „System" menu using <TUNE/AUTO/ENTER/uII> and then
press the knob.
3. Use the <TUNE/AUTO/ENTER/uII> knob to select the "Language" menu and then confirm.
4. Use the <TUNE/AUTO/ENTER/uII> knob to select the desired language and press to confirm.

Setting the time

When receiving a DAB + or FM station in sufficient quality, the clock will be set automatically. De-
pending on the reception strength, this process may take some time. If no corresponding station is
available, you can also set the time manually:
1. Turn on the radio and use the button
2. Press the <MENU> button, select the „System" using the menu <TUNE/AUTO/ENTER/uII> and
then press the knob.
3. Use the <TUNE/AUTO/ENTER/uII> keys to select the "Time" menu and then confirm.
4. Select "Set Time/Date" and confirm. Then select, set and confirm hours, minutes, day,
month and year.

Additional settings in the "Time" menu

The following functions can be set in the "Time" menu:
"Auto Update": Setting from which source the time is automatically retrieved.
Choices: "Update from Any" / "Update from DAB" / "Update from FM" / "No update"
"Set 12/24 hours": Setting the time format.
Choices: "Set 24 hours" / "Set 12 hours"
"Set date format": Setting the date format ..
Choices: "DD-MM-YYYY" / "MM-DD-YYYY"
8
"
on the radio.
"
"
button to select the FM source.
"
to select the FM source.
on the radio. The display briefly shows