Dtmf (Dual Tone Multi Frequency) Calls; Making A Dtmf Call; Autodial; Stun Code - Kenwood NX-700 Instruction Manual

DTMF (DUAL TONE MULTI FREQUENCY) CALLS

Note: DTMF calls can be made only in analog Operation.

MAKING A DTMF CALL

■ Manual Dialing (Microphone Keypad Only)
1 Press and hold the microphone PTT switch.
2 Enter the desired digits using the microphone keypad.
• The corresponding DTMF tones sound each time you press a key.
• If you release the microphone PTT switch, transmit mode will end even if the
complete number has not been sent.
■ Keypad Auto PTT (Microphone Keypad Only)
If your dealer has activated the Keypad Auto PTT function, simply press the
microphone keys to make the call.
• The DTMF code will be sent automatically when you press a key.
■ Store & Send
1 Press the key programmed as Autodial.
2 Enter the desired digits using the microphone keypad.
• The digits appear on the display as you enter them.
• Alternatively, you can enter digits by using
• You can enter up to 30 digits before transmitting.
3 After entering the complete number, press the microphone PTT switch or
the key to transmit.
Note: If you switch the power OFF before transmitting the number, the number will be cleared.

AUTODIAL

Autodial allows you to quickly call DTMF numbers that have been programmed
onto your transceiver.
1 Press the key programmed as Autodial, or access the Autodial function
through the Menu {page 12}.
• The fi rst entry in the Autodial list appears on the display.
2 Press the /
your desired Autodial list number.
• The stored entry appears on the display.
3 Press the microphone PTT switch to make the call.

STUN CODE

This function is used when a transceiver is stolen or lost. When the transceiver
receives a call containing a stun code, either transmit mode will be disabled,
or both receive mode and transmit mode will be disabled. The stun code is
cancelled when the transceiver receives a call with a revive code.
20
keys or enter the appropriate DTMF number (01 ~ 32) to select
the / keys
{page 14}.