5.4.4
Logical NOT
Function
Inverter: The block inverts the input signal.
If the input is set to 0, the output of the block is set to 1.
If the input is set to 1, the output of the block is set to 0.
Parameters
Parameters
Input parameters
En
Input
Output parameters
Output
5.5
Blocks for basic types of calculation
5.5.1
Addition
Function
The block adds the values of up to four analog inputs. The sum is written to the output.
RTU3030C
Operating Instructions, 09/2017, C79000-G8976-C382-04
Range of values
Description
Enable parameter, see section Often used parameters
(Page 198).
The value of the input is processed by the block function.
Digital input /
•
output / bit
memory
True / False
•
STATUS_ERROR
•
Tag in which the value calculated by the block (the in-
Digital output / bit
•
verted value of the input) is output.
memory
5.5 Blocks for basic types of calculation
Programming
203