Table of Contents
Advertisement
● Response when insufficient memory space on SD card
Here you specify the response if there is no longer enough memory space on the SD
card for new log files:
– Delete older log files
– Stop logging
● Separator
Here, you specify the separate between the individual blocks of data in the log file:
Comma, colon or semicolon
● Log file name prefix
Here you can enter a name prefix with a maximum of three characters that is placed at
the beginning of the file name of the log file.
● Maximum number of Log files
Here you specify the maximum number of log files that will be saved on the SD card:
Max. 999999
● Send last log file by e-mail when a new one is created.
If the option is enabled, the last log file is sent as an attachment of an e-mail as soon as a
new log file is created.
– Recipient group
– Subject
– Text
– Attachment zipped
– Change immediately to communication mode
RTU3030C
Operating Instructions, 09/2017, C79000-G8976-C382-04
The process data continues to be acquired. When the SD card is full, with the creation
of new log files the oldest log files are successively deleted (FIFO principle).
Already stored process data is retained. When the SD card is full, saving new process
data is suspended until data is deleted manually from the SD card.
Here you select the recipient group for the e-mails with the log files.
Configuration of the recipient groups in "Users / groups"
Here, select the subject of this e-mail.
Configure the subject in "Tags" > "Texts"
Here, select the text for this e-mail.
Configure the text in "Tags" > "Texts"
If you enable the option, the attachment is sent as a compressed ZIP archive.
If you select the option, the RTU changes immediately to communication mode as
soon as a new log file is ready for sending.
Configuration (WBM)
4.17 Operating mode
141
Advertisement
Table of Contents
