Application and functions
1.6 Communications services
Other communication services
The RTU can send messages and data for configured event classes (diagnostics buffer
entries) either as SMS messages or as e-mails.
● SMS (receive)
The following SMS messages can be received:
– Wake-up SMS message configured in the Configuration and Monitoring Tool (CMT) of
– Manually triggered wake-up SMS message from the Web server of TCSB for
– Wake-up SMS from SINEMA Remote Connect
– Manual TeleService SMS message with deadline
– SMS message as request for a diagnostics SMS message
You enable receipt of SMS messages in the WBM, refer to the section SMS (Page 116).
● SMS (sending)
The following SMS messages can be sent:
– SMS message if diagnostics messages occur, refer to the section Notifications
– SMS message with event-related process data via program blocks, refer to the section
– Diagnostics SMS message, refer to the section Diagnostics options (Page 253).
– SMS messages if certain events occur relating to the SD card or battery module
– SMS when the IP address changes on the WAN interface
● E-mail (sending)
The following e-mails can be sent:
– E-mail if diagnostics messages occur, refer to the section Notifications (Page 98).
– E-mail with event-related process data via program blocks, refer to the section Send
– E-mails with process data (log file) using the logging function, refer to the section
– E-mails if certain events occur relating to the SD card or battery module
– E-mail when the IP address changes on the WAN interface
In the attachment of an e-mail, there is the option of transferring the current process
image, the log file or the entire diagnostics buffer. The attachment is transferred
uncompressed or compressed as a ZIP archive.
You configure the access data and general settings for using the e-mail service in the
WBM, refer to the section E-mail (Page 120).
For information on the configurable security option "STARTTLS" when sending e-mails,
refer to the section Security functions for communication (Page 28).
26
TCSB for establishing a connection to the telecontrol server
establishing a connection to a PC (via the telecontrol server)
(Page 98).
Sending SMS messages (Page 241).
e-mail (Page 242).
Logging (Page 140).
Operating Instructions, 09/2017, C79000-G8976-C382-04
RTU3030C