Table of Contents
Advertisement
You configure further parameters of notifications on the following WBM pages:
– Recipient of the messages, refer to the section User / Recipient (Page 133).
– Message texts, refer to the section Texts (Page 166).
– For information on selecting the attachment of the e-mail, see section Notifications
● FTP (sending)
Transfer of FTP files via a program block to an FTP server reachable via LAN or the
Internet
The function corresponds to the FTP command "PUT".
An FTP file transfer is possible for the following data:
– Current log file
– The entire process image
– The entire diagnostics buffer
The file can be transferred uncompressed or compressed as a ZIP archive. For
uncompressed transfer, the file transfer can also be performed with the "Append"
function. When this is used, when the file being transferred arrives at the destination
location, the FTP server appends the file to an existing file of the same name instead of
overwriting it.
For information on the program block see section FTP file transfer (Page 243).
For information on the configurable security option when using FTP transfer see section
Security functions for communication (Page 28).
● HTTP / HTTPS
The communications partners always connect to the WBM of the RTU. HTTP/HTTPS is
used for the following connections of the RTU:
– Connection of the configuration PC via the LAN interface of the RTU, optionally via an
– HTTP/HTTPS connection of the configuration PC via mobile wireless (via an
– HTTPS connection of the configuration PC via mobile wireless if the RTU has a
– Connection of a service PC to the RTU via the Web server of TCSB more
RTU3030C
Operating Instructions, 09/2017, C79000-G8976-C382-04
(Page 98).
See section Logging (Page 140).
external router.
OpenVPN tunnel)
publically reachable IP address.
You will find information on usage in the section Establishing a connection to the WBM
of the RTU (Page 81).
Application and functions
1.6 Communications services
27
Advertisement
Table of Contents
