Siemens SIMATIC RTU3030C Operating Instructions Manual page 5

Telecontrol - rtu
Hide thumbs Also See for SIMATIC RTU3030C:
Table of Contents

Advertisement

● Editorial revision
For the product notices on the Internet see:
Link: (https://support.industry.siemens.com/cs/ww/en/ps/21767/pm)
Replaced edition
Release 07/2016
Current manual release on the Internet
You will also find the current version of this manual on the Internet pages of Siemens
Industry Online Support:
Link: (https://support.industry.siemens.com/cs/ww/en/ps/21767/man)
Cross references
In this manual there are often cross references to other sections.
To be able to return to the initial page after jumping to a cross reference, some PDF readers
support the command <Alt>+<left arrow>.
Sources of information and other documentation
You will find an overview of further reading and references in the Appendix of this manual.
License conditions
Note
Open source software
Read the license conditions for open source software carefully before using the product.
You will find the license conditions as a loadable file on the WBM pages of the device. You
will find the description of opening and loading loading license conditions in the section
General functions of the WBM (Page 75).
You will find the packed file with the license conditions for Open Source software under the
following name:
● OSS_RTU30xxC_86.zip
Firmware
The firmware is signed and encrypted. This ensures that only firmware created by Siemens
can be downloaded to the device.
RTU3030C
Operating Instructions, 09/2017, C79000-G8976-C382-04
Preface
5

Advertisement

Table of Contents
loading

Table of Contents