Leds, Connectors, Buttons, Card Slots; Appearance Of The Device - Siemens SIMATIC RTU3030C Operating Instructions Manual

LEDs, connectors, buttons, card slots

2.1

Appearance of the device

Figure 2-1
Table 2- 1 Meaning of the number symbols
①
X11: Control output to supply sensors and actuators
②
X20..X23: Terminals for digital inputs
③
X30..X31: Terminals for digital outputs
④
XR1A1 R: SMA socket for the antenna
⑤
MC : Receptacle for SD card
⑥
DI / DQ: Status LEDs for digital inputs/outputs
⑦
WKUP/RESET: button
⑧ Service interface (on the side ) - not required
⑨
AI: Status LEDs for analog inputs
⑩
Wireless status LEDs
RTU3030C
Operating Instructions, 09/2017, C79000-G8976-C382-04
Location of the LEDs, connectors, buttons, card slots
⑪
MAC address
⑫
Serial number as (2D matrix code, alphanumeric)
⑬
SIM: Receptacle for SIM card (underside)
⑭
X40..X43: Terminals for analog inputs
⑮
X1P1: Ethernet interface RJ-45 (underside)
⑯
X10 IN: Input for external power supply
X10 CTRL: Control output to supply sensors and
actuators
⑰ Slot for signal boards - not currently required
⑱
Connection status LEDs "LAN", "SIM", "VPN"
⑲
X12 BAT IN: Connector for battery module (on the
side)
⑳
RTU status LEDs "DC IN", "BAT", "STATUS"
2
39