Table of Contents
Advertisement
Configuration (WBM)
4.18 Tags
Update cycle
● Reduction factor for basic cycle
The reduction factor lowers the frequency of the update cycle for this input, the intervals
between update cycles increase.
You configure the basic cycle in "Operating mode.
● Logging
See section Configuration of the tags , general parameters (Page 150).
4.18.10
Texts
Note the characters permitted for the input boxes and the syntax of the placeholders, see
section Permitted characters and parameter lengths (Page 77).
Texts
Up to 20 texts can be configured.
● Add
Click the button to create a new text tag.
● Delete
First select a text in the table and then click "Delete" to delete this text tag.
A prompt for confirmation appears.
– Delete
– Cancel
Change text
● Name
Name of the tag
● Text
Enter the text here that will be transferred with the message.
● Number of characters
Shows the current number of characters being used in the text
166
Click "Delete" to delete the tag irrevocably.
Click "Cancel" if you do not want to delete the tag. The normal view of the WBM page
appears again.
Operating Instructions, 09/2017, C79000-G8976-C382-04
RTU3030C
Advertisement
Table of Contents
