Table of Contents
Advertisement
Test SMS
Here, for example, you can send a test SMS message during commissioning.
● Recipient group
Here, enter the recipient group for the message. You configure recipient groups on the
WBM page "Recipient / Groups".
● Subject
Here, you enter the subject of the message. You configure the subject on the WBM page
"Tags" > "Texts".
● Text
Here, you enter the configured text of the message. You configure the texts on the WBM
page "Tags" > "Texts".
● Send test e-mail
Triggers the sending of the test SMS message.
4.13.5
DynDNS
In this tab you can enable the use of address assignment by dynamic DNS (DynDNS) on the
mobile wireless interface. To do this you require one of the service providers that can be
selected below and the corresponding access data.
DynDNS is recommended when using HTTPS.
Note
DynDNS only with a public IP address
DynDNS can be used only with a public IP address. Check this with your network provider.
If you log the RTU on to a DynDNS service, the device can be reached from the Internet
under a host name, for example "myName.dyndns.org".
Generally the RTU will not have a fixed IP address on the mobile wireless interface. By using
a dynamic domain name system (DynDNS) it can however be reachable on the Internet. The
public IP address is then made known by the DynDNS service.
With each dial in to the data network and if the IP address is changed on the mobile wireless
interface, the DynDNS server is informed of the received IP address via HTTPS. An entry
with the IP address is written to the diagnostics buffer.
RTU3030C
Operating Instructions, 09/2017, C79000-G8976-C382-04
Configuration (WBM)
4.13 WAN
117
Advertisement
Table of Contents
