Remote Supervisor Adapter Components - Avaya S8500 Manual

Remote Supervisor Adapter components

Remote Supervisor Adapter components
See Figure 9, Connector panel on the Remote Supervisor Adapter,
connectors and components of the RSA. See
components, on page 48 for a detailed description of the components and connectors.
Figure 9: Connector panel on the Remote Supervisor Adapter
Figure notes
1 Clip
2 External power-supply connector
3 Power and error LEDs
Table 4: Description of the Remote Supervisor Adapter components
RSA component
Clip
External power-supply
connector
Power and error LEDs
Ethernet RJ-45 connector
Serial connector
ASM RS-485 RJ-14
connector
48
1 2 3
Description
Power cord retaining clip
Connect the power-supply adapter to this connector. A power cord
connects from the power-supply adapter to the power source. This
connection provides power to the RSA that is independent of the
Avaya S8500 Media Server power supply.
The GREEN LED: Shows the status of the power connection.
The AMBER LED: Shows that an error condition exists on the
RSA.
A 10/100 Mbps connector for LAN connectivity.
Used for serial modem connectivity.
Not used in the Avaya S8500 Media Server configuration.
Installing the Avaya S8500 Media Server with an Avaya G650 Media Gateway
on page 48 for locations of the
Table 4, Description of the Remote Supervisor Adapter
4 5 6
h3msrsap LAO 071503
4 ASM RS-485 RJ14 connector
5 Serial connector
6 Ethernet RJ45 connector
December 2003