Conventions; General; Physical Dimensions - Avaya S8500 Manual

About this book

Conventions

•
Configuring the network interface card
•
Configuring the Remote Supervisor Adapter
You next install the media gateways, using sections in
appropriate for the system you are installing.
Perform tasks related to the Main Distribution Frame in the following sections as appropriate:
•
Installing the main distribution frame
•
Connecting the media gateway to the main distribution frame
•
Connecting the main distribution frame to stations and the public switched telephone network
page 191
Connect the system to the customer's network using information in
on page 222.
Connect the necessary telephone, trunking, and peripheral equipment using the information in
and wiring telephones and trunks
page 267.
Complete the installation using information in the following sections:
•
Completing the installation administration
•
Accessing the media server
•
Testing the complete configuration
If problems occur during the installation, use
them.
Conventions
This section describes the conventions that we use in this book.

General

We show commands and screens from the newest MultiVantage system and refer to the most current
books. You must substitute the appropriate commands for your system and refer to the books that you
have available.

Physical dimensions

All physical dimensions in this book are in English units followed by metric units in parentheses. Wire
gauge measurements are in AWG followed by the diameter in millimeters in parentheses.
16 Installing the Avaya S8500 Media Server with an Avaya G650 Media Gateway
on page 78
on page 60
Installing the media gateways
on page 170
on page 232 and Installing and wiring telephone power supplies
on page 285
on page 291
on page 298
Troubleshooting an installation
on page 94 as
on page 185
Connecting to the IP server interfaces
on page 320 to try to resolve
December 2003
on
Installing
on