Completing The Installation Administration; Verifying Translations; Setting Daylight Savings Time Rules - Avaya S8500 Manual

Completing the installation administration

This section covers the following tasks:
•
Verifying translations
•
Setting daylight savings time rules
•
Setting locations (if necessary)
•
Verifying date and time
•
Viewing alarms
•
Backing up the media server to the Compactflash
•
Telneting to media server
•
Enabling alarms to INADS via modem
•
Enabling alarms to INADS via SNMP
•
Registering the system

Verifying translations

1
Type list configuration all
system.
2
Type list ipsi
3
Check the administration status on the following items:
•
•
•

Setting daylight savings time rules

You can set up to 15 customized daylight savings time rules. If you have media gateways in several
different time zones, you can set up rules for them on a per-location basis. A daylight savings time rule
specifies the exact time when you want to transition to and from daylight savings time. It also specifies
the increment at which to transition.
Installing the Avaya S8500 Media Server with an Avaya G650 Media Gateway
December 2003
on page 285
on page 286
on page 287
on page 287
on page 289
on page 290
and press Enter to view all the administered circuit packs in the
and press Enter to verify the location of the IPSI circuit packs.
list station
list trunk-group
list hunt-group
NOTE:
Even though you set the date, time, and time zone through the Web interface on the media
server, you also must set the daylight savings time rules and locations and verify the date
and time through SAT commands.
NOTE:
The default daylight savings rule is 0, meaning no daylight savings transition.
Completing the installation administration
on page 285
on page 289
on page 289
285