Digital Tie Trunk Example - Avaya S8500 Manual

Installing and wiring telephones and trunks
Figure 91: Analog Tie Trunk wiring
Figure notes
1 External Trunk or Adapter

Digital tie trunk example

This example shows how to connect digital tie trunk wiring from one media gateway to another one or
any other Avaya configuration.
1
Install cross-connect jumpers to connect the pins from the digital trunk circuit pack to appropriate
pins on the manufacturer's or supplier's external digital trunk.
2
Set option switches on the port circuit pack (digital trunk).
3
See the Job Aid entitled
4
Administer on the DS1 and trunk group screens through ASA. See the Administrator's Guide for
Avaya Communication Manager for more details.
Figure 92: Digital Tie Trunk wiring
Figure notes
1 External Trunk
2 Digital Trunk Circuit Pack
3 LO
238
T.1 26
1
R.1
T1.1 27
R1.1
2
E.1 28
M.1
3
Figure 92, Digital Tie Trunk wiring,
Option Switch Settings
Installing the Avaya S8500 Media Server with an Avaya G650 Media Gateway
29 T.2
4 R.2
T1.2
30
R1.2
5
E.2
31
6 M.2
tie_wire RBP 071796
2 Tie Trunk Circuit Pack
on page 238 shows the connections.
for detailed information.
4 LO (Balanced Output Pair)
5 LI
6 LI (Balanced Input Pair)
December 2003