Disconnecting From The Media Server - Avaya S8500 Manual

2
Under Diagnostics, click Execute Ping.
3
Type in the IP address of a computer on the network.
4
Click Execute Ping.
5
Verify that the ping was successful, indicating that the media server is connected to the customer's
network.
6
If DNS is administered, type in the host name of a computer on the network.
7
Click Execute Ping.
8
Verify that the ping was successful, indicating that DNS is working.
If available, have a customer representative do the following test from a computer on the network:
9
Click Start > Run to open the Run dialog box.
10
Type
command
11
Type ping serveripaddress
server.
12
Verify that the ping was successful.
13
If DNS is administered, type
name of the media server.
14
Verify that the ping was successful.

Disconnecting from the media server

•
Unplug the crossover cable from the services port on the back of the media server.
Installing the Avaya S8500 Media Server with an Avaya G650 Media Gateway
December 2003
and click OK to open an MS-DOS command window.
and click OK, where
ping servername
Configuring the media server
serveripaddress is the IP address of the media
and press Enter, where
servername
is the host
59