Configuring and connecting the hardware
After you have installed the hardware in the rack (see the Getting Started Guide for the Avaya S8500
Media Server for installation information), you must install the Avaya Communication Manager CD,
configure the components, and connect them together.
This section covers the following tasks:
•
Configuring the media server
•
Configuring the SNMP modules in the uninterruptible power supplies
•
Configuring the SNMP subagent in the Avaya Ethernet switch (if used)
•
Configuring the network interface card
Installing the Avaya S8500 Media Server with an Avaya G650 Media Gateway
December 2003
on page 52
on page 78
Configuring and connecting the hardware
on page 84
on page 87
51