Connecting to the IP server interfaces
Enabling control of IPSIs
1
Type
change system-parameters ipserver-interface
change system-parameters ipserver-interface
SERVER INFORMATION
Primary Control Subnet Address: 172. 22.
Secondary Control Subnet Address:
OPTIONS
IPSI Control of Port Networks: enabled
2
Make sure the
3
Press Enter to effect the changes.
Verifying license status
•
Under Security, click View License Status and verify that the license mode is now normal.
228
NOTE:
Make sure the IPSIs have the same, current firmware.
NOTE:
This procedure enables the IPSI circuit packs and allows them to control the port
networks.
IP SERVER INTERFACE (IPSI) SYSTEM PARAMETERS
IPSI Host Name Prefix:
Switch Identifier: A
IPSI Control of Port Networks:
Installing the Avaya S8500 Media Server with an Avaya G650 Media Gateway
and press Enter.
0.
0
.
.
.
field is set to enabled.
Page
1 of
1
December 2003