Testing Connectivity To Customer's Network - Avaya S8500 Manual

Testing connectivity to customer's network

1
Under Diagnostics click Ping.
2
In the
Select Host or IP address to Ping
network.
3
Click Execute Ping.
4
Verify that the ping was successful, indicating that the media server is connected to the customer's
network.
5
If DNS is administered, type in the host name of a computer on the network.
6
Click Execute Ping.
7
Verify that the ping was successful, indicating that DNS is working.
If available, have a customer representative do the following test from a computer on their network:
8
Click Start > Run to open the Run dialog box.
9
Type command
10
Type ping serveripaddress
server.
11
Verify that the ping was successful.
12
If DNS is administered, type
name of media server.
13
Verify that the ping was successful.
Installing the Avaya S8500 Media Server with an Avaya G650 Media Gateway
December 2003
field, type in the IP address of a computer on the
and click OK to open an MS-DOS command window.
and click OK, where serveripaddress is the IP address of media
ping servername
Configuring the network interface card
and press Enter, where servername is the host
79