Installing The G700 Media Gateway - Avaya S8500 Manual

Installing the G700 Media Gateway

A G700 Media Gateway or a G700 Media Gateway with an Avaya S8300 Media Server configured as a
Local Spare Processor (LSP) may be added to either a Avaya S8700 Multi-Connect or IP Connect
configuration or Avaya S8500 Media Server. To add a G700 Media Gateway, you must have a TN799DP
Control-LAN (C-LAN) circuit pack installed in the MCC1, SCC1, CMC1, G650, or G600 Media
Gateway. The G700 Media Gateway is an endpoint on the C-LAN circuit pack.
configuration showing the G700 Media Gateway connecting to the AvayaS8500 Media Server, on page
166 shows a sample configuration.
The general process for adding a G700 Media Gateway to an existing G650 Media Gateway follows:
•
Install the G650 Media Gateway.
•
Install and configure the G700 Media Gateway.
•
Add the media gateway to the media server translations.
•
Install a TN799DP (V5 or higher) C-LAN circuit pack.
•
Administer the C-LAN circuit pack by:
•
•
•
For more information on administering a TN799DP Control-LAN (C-LAN) circuit pack, see the
document Adding Hardware to Media Gateways section, TN799DP Control-LAN (C-LAN)
circuit pack.
For complete information on how to install and configure a G700 Media Gateway, see
Upgrades for the Avaya G700 Media Gateway and Avaya S8300 Media
Installing the Avaya S8500 Media Server with an Avaya G650 Media Gateway
December 2003
Adding the node names and IP addresses for each G700 Media Gateway being added on
the IP Node Names screen.
Filling in the required fields on the IP Interfaces screen.
Enabling the Ethernet port.
Figure 52, Sample
Installation and
Server.
165