Connecting the media gateway to the main distribution frame
4
At the rear of the auxiliary cabinet, connect 1 end of the connector cable to the assigned
connector.
5
Route the cable down the rear of the cabinet and through the cable slack manager to the MDF.
6
At the MDF, connect the other end of the cable to the assigned terminal/connecting block
connector.
7
Store the excess cable in the cable slack manager.
8
Repeat Steps 2 through 6 until all cables are installed.
Figure 68: Self-stick label on 25-pair cable connector
190
Installing the Avaya S8500 Media Server with an Avaya G650 Media Gateway
December 2003