Avaya S8500 Manual page 226

Connecting to the IP server interfaces
8
Type
set control interface ipaddr netmask
provided IP address and
9
Press Enter to effect the changes.
10
Type
show control interface
The IP address, subnet mask, and default gateway information will be displayed.
Verify that the proper information was entered.
11
If required, type
provided IP address for their gateway.
12
Press Enter to effect the changes.
13
If required, use the
enter VLAN and diffserv parameters for the IPSI. Use Help to obtain syntax guidelines for these
commands.
14
Type
reset
Answer Y to the warning.
15
Type
quit
226
netmask
and press Enter.
set control gateway gateway
set vlan priority
and press Enter
NOTE:
Resetting the IPSI terminates the administration session. If further administration is
required, start a new telnet session to the IPSI.
to logoff the IPSI.
NOTE:
Control network settings (IP address, subnet mask, and gateway) become effective when
you exit the IPADMIN session.
Installing the Avaya S8500 Media Server with an Avaya G650 Media Gateway
and press Enter, where
is the customer provided subnet mask.
and press Enter, where
, ,
set vlan tag set vlan id
is the customer-
ipaddr
is the customer-
gateway
, and commands to
set diffserv
December 2003