Testing Expansion Interface Circuit Packs, If Used; Testing Time Division Multiplexing Bus For Each Port Network - Avaya S8500 Manual

Testing the complete configuration
Testing Expansion Interface circuit packs, if
used
Check each Expansion Interface (EI) circuit pack in the media gateway.
1
Type test board UUCSS
gateway, and press Enter.
2
Verify the screen displays test results similar to
Interface Board 2A01,
3
If any result is FAIL, check the connections for the fiber optic link.
4
Repeat Steps 1 and 2 for each Expansion Interface circuit pack.
Figure 116: Sample test results for Expansion Interface Board 2A01
TEST RESULTS
Port
02A01
02A01
02A01
02A01
02A01
02A01
Testing time division multiplexing bus for
each port network
Check each TDM bus for each port network (PN) in the configuration.
1
Type
test tdm port-network 1
2
Verify a test results screen similar to
on page 303
3
If result is FAIL for any test, check the connectors of the TDM bus cables in PN 2.
4
Repeat these steps for each PN to check the TDM bus cables.
302
where UUCSS is the cabinet, and slot for an EI circuit pack in the media
NOTE:
Labels on the port network and on the strip under the circuit pack contain this information.
on page 302. This example is for board 2a01.
Maintenance Name Alt. Name Test No. Result
EXP-INTF
EXP-INTF
EXP-INTF
EXP-INTF
EXP-INTF
EXP-INTF
and press Enter.
appears.
Installing the Avaya S8500 Media Server with an Avaya G650 Media Gateway
Figure 116, Sample test results for Expansion
237 PASS
238 PASS
240 PASS
241 PASS
244 PASS
316 PASS
Figure 117, Sample test results for TDM bus port network 1,
Error Code
December 2003