Circuit Pack Leds - Avaya S8500 Manual

Testing the complete configuration
Figure 125: LED display indicating connectivity status
Figure notes
Connectivity status
IPSI is connected to media server
IPSI has an IP address
Laptop computer is connected to IPSI
services port

Circuit pack LEDs

Typically, each circuit pack has three LEDs on the front panel. The
316 table describes the red, green, and yellow LEDs and their meaning. Also see
LEDs on faceplate,
Table 39: Circuit pack LEDs
LED
color Status
Red Alarm
Green Testing
Yellow Busy
316
1 2
on page 317.
Description
The media server has detected a fault in this circuit pack. The alarm log
should contain an on-board alarm. The red LED also is lit briefly when a
circuit pack is inserted or reset. If the circuit pack passes its initialization
tests, the LED goes out.
The media server is currently running tests on this circuit pack as part of
background maintenance or demand testing. This LED also is lit during
initialization tests when a circuit pack is inserted or reset.
The circuit pack currently is in use.
Installing the Avaya S8500 Media Server with an Avaya G650 Media Gateway
3
1 2 3
no yes yes
no no yes
no no no
Table 39, Circuit pack LEDs,
4 5
4 5
yes yes
yes no
yes yes
on page
Figure 126, Circuit pack
December 2003