Panasonic JB-3300 Technical Manual page 39

5.4 System Unit/Handle Mounting Assembly/I/O Board
Step 1
1. Removing Plasma Display Unit 1. Remove Plasma Display Unit
(see 5.1 Steps 1 through 5).
2. Removing Floppy Disk Drive Unit 2. Remove Floppy Disk Drive Unit
(see 5.2 Steps 1 through 4).
3. Removing Power Supply Unit 3. Remove Power Supply Unit
(see 5.3 Steps 1 through 3).
Step 2
Removing Handle Mount Assembly 1. Remove mounting screws [B].
2. Remove Handle Mount Assembly [C].
Figure 5-13
Step 3
Removing Base Plate 1. Detach FG Cable [D].
2. Remove mounting screws [E].
3. Lift up Base Plate [F].
Figure 5-14
I - 21