Panasonic JB-3300 Technical Manual page 109

9.5.7 Change Menu
CRT Displays or
T P ; .
step est Procedures Printer Print Outs
1 Type INSTALLED DEVICE(S) ARE If this is a list of the
into DIAGNOSTIC devices in the system, press y
MENU. 1. MAIN BOARD to return to the diagnostic
2. XXX KB MEMORY menu. If not, press n.
3. KEYBOARD
4. DISPLAY
5. PRINTER
6. SERIAL PORT
7. FLOPPY DISK
8. HARD DISK
9. LOCAL SPEAKER
10. CO-PROCESSOR
Is this correct?
(Y/N)
DELETE
1 Press . Enter (D)elete or
(A)dd?
2 Press a] . ENTER THE NUMBER OF If your system does not have
THE DEVICE TO BE all the devices listed, press
DELETED? _ d.
3 Press number Key in the number of the
key, . device on the list that is not
in your system and press .
ADD
1 Press . Enter (D)elete or
(A)dd?
2 Press [a] - ENTER THE NUMBER OF If the list does not contain
THE DEVICE TO BE all the devices (including op-
ADDED? tions) in your system, press a.
3 Press number You will see a list of devices
key, [+] .
on the screen. Key in the
number of the device to be
added to the list of the
installed devices and press
.
I - 94