Panasonic JB-3300 Technical Manual page 34

5.1 System Unit/Plasma Display Unit
step 1
Preparation for Disassembly
Figure 5-2 B
1. Set Main Power Switch [A] to OFF.
2. Unplug AC Cable [B] from outlet.
3. Disconnect all cables (AC Power
Cord [B], Keyboard Cable [C],
and all optional unit cables)
from System Unit.
4. Move Keyboard [D] and all
optional units away from working
area.
Caution: When removing the keyboard
cable [C], hold the
connector part and pull it
toward you. Do not pull
the cord directly.
Step 2
Removing Rear Cover
- Side View \
L il
etTS
Figure 5-3 >
1. Press down on thumbsets [E] of
Rear Cover [F] and unlatch claws
inside, then lift Rear Cover
[F] up from Plasma Display Unit
[G].
Do not use screwdriver to
wedge apart Rear Cover from
Plasma Display Unit.
Note:
I - 16