Panasonic JB-3300 Technical Manual page 110

Error listing
Test Procedures
CRT Displays or
Printer Print Outs
Type [4]
into DIAGNOSTIC
MENU.
If necessary, first exit from
the SELECT DEVICES menu by
pressing 16 and .
The screen will then display messages in the format shown in the following
example:
ERROR LISTING
NUMBER DEVICE
7 FLOPPY DISK
Press any key to continue or ESC to end _
EXECUTE ERROR
00001 00000
Number of program executions and errors are also included in the above
message, when a problem occurs.
If you want to see the details of Error Listing, press any key. The
details of Error Listing will be displayed on the screen. However, the
contents may differ depending on the cause of the problem.
If you want stop in the middle of the program, press the ESC key.
T - 95