Panasonic JB-3300 Technical Manual page 36

5.2 System Unit/Floppy Disk Drive Unit
Step 1
Removing Plasma Display Unit 1. Remove Plasma Display Unit
(see 5.1 Steps 1 through 5).
Step 2
Removing Reinforcement Plates 1. Remove screws [B] retaining
Reinforcement Plates [C].
2. Remove PSU Shield Plate [D].
we 3. Remove Reinforcement Plates [c].
Figure 5-6
Step 3
Removing Floppy Disk Drive Unit 1. Disconnect Connectors [E] from
Floppy Disk Drive Unit [F].
2. Remove mounting screws [G].
3. Slide Floppy Disk Drive Unit [F]
to the right as indicated by
arrow, then lift it up from
System Unit.
(Top View)
Figure 5-7
Step 4 1. Remove Floppy Disk Drive Unit [C].
Figure 5-8
I - 18