Multi Information Display
Removal
1) Disconnect negative (–) cable at battery.
2) Remove instrument panel center upper garnish.
3) Remove 2 mounting screws (1) of multi information display.
4) Remove multi information display (2) from instrument panel.
5) Disconnect multi information display coupler.
Installation
Reverse removal procedure.
Outside Air Temperature Sensor
Removal
1) Remove front bumper referring to "Front Bumper and Rear
Bumper" in Section 9.
2) Disconnect outside air temperature sensor connector.
3) Remove outside air temperature sensor (1).
Installation
Reverse removal procedure.
INSTRUMENTATION / DRIVER INFORMATION 8C-7