Suzuki Wagon R Manual page 4033

7C5-12 CLUTCH (Z12XEP ENGINE MODEL)
1
Installation
1) Install cluster gear cover (1) and tighten bolt (2) to specified
torque.
Tightening torque
Cluster gear cover bolt (a): 5 N·m (0.5 kg-m, 3.5 lb-ft)
2, (a)
2) Drive in clutch release shaft No.1 and No.2 bushes into tran-
saxle case.
3) Install release shaft bearing and release fork.
4) Apply grease to clutch release shaft (2) and then install
2, "A"
clutch release shaft and tighten fork bolt (1) to specified
torque.
1, (a)
"A": Grease 99000-25010
Tightening torque
Clutch release fork bolt
(a): Tighten 25 N·m (2.5 kg-m, 18.0 lb-ft), 90° and 15° by the
specified procedure.
Clutch Release Mechanism Inspection
Clutch release shaft
Check clutch release shaft and clutch release fork for deflection
or damage.
If abnormality is found, replace it.