Suzuki Wagon R Manual page 3836

ENGINE MECHANICAL (Z10XEP AND Z12XEP ENGINES) 6A4-9
Air Cleaner Element Inspection and Cleaning
• Check air cleaner element for dirt. Replace excessively dirty
element.
• Blow off dust by compressed air from air outlet side of ele-
ment.
Air Cleaner Assembly Removal and Installa-
tion
Removal
1) Remove intake pipe (5).
2) Disconnect connector for MAF sensor (2).
3) Detach engine vent hose (4).
4) Detach intake hose (3).
5) Remove air cleaner housing (1)
Installation
Reverse removal procedure for installation noting the following.
• Clamp each hose securely.
• Tighten air cleaner pipe clamp and air cleaner housing to
specified torque.
Tightening torque
Air cleaner pipe clamp bolt: 3.5 N·m (0.35 kg-m, 2.5 lb-ft)
Air cleaner housing bolt: 10 N·m (1.0 kg-m, 7.5 lb-ft)
Knock Sensor Removal and Installation
Refer to "Knock Sensor Removal and Installation" in Section 6E4.