Suzuki Wagon R Manual page 3636

Expansion Valve
Removal
1) Recover refrigerant from refrigeration system by using
2) Loosen liquid pipe mounting bolt (1).
3) Loosen expansion attaching bolt (2) and remove expansion
2, (a)
3
1
Installation
Reverse removal procedure for installation, noting the following
points.
• Apply compressor oil to expansion valve O-ring and connect-
• Evacuate and charge system referring to "Operation Proce-
Tightening torque
Expansion attaching bolt (a): 3.0 N·m (0.3 kg-m, 2.5 lb-ft)
Dual Pressure Switch (Z10XEP and Z12XEP
Engine Models)
Removal
1) Recover refrigerant from refrigeration system by using
2) Disconnect negative (–) cable at battery.
3) Remove dual pressure switch.
Installation
Reverse removal procedure for installation, noting the following
points.
• Apply compressor oil to dual pressure switch O-ring.
• Evacuate and charge system referring to "Operation Proce-
Tightening torque
Dual pressure switch: 11 N·m (1.1 kg-m, 8.0 lb-ft)
recovery and recycling equipment referring to "Operation
Procedure for Charging A/C with Refrigerant" in this section.
valve (3).
ing hose and pipe O-ring.
dure for Charging A/C with Refrigerant" in this section.
recovery and recycling equipment.
dure for Charging A/C with Refrigerant" in this section.
AIR CONDITIONING (OPTIONAL) 1B-17