Suzuki Wagon R Manual page 3854

ENGINE MECHANICAL (Z10XEP AND Z12XEP ENGINES) 6A4-27
23) Remove engine rear mounting bolt (1), engine left mounting
nuts (2) and engine right mounting bracket bolts (3).
24) Before removing engine with transaxle from vehicle, recheck
to make sure all hoses, electric wires and cables are discon-
nected from engine and transaxle.
25) Lower engine with transaxle from vehicle.
NOTE:
Before lowering engine, to avoid damage to A/C com-
pressor, raise it through clearance made on engine
crankshaft pulley side. At this time, use care so that no
excessive force is applied to hoses.
26) Disconnect transaxle from engine referring to "Transaxle Unit
Dismounting and Remounting" in Section 7A5.
27) Remove clutch cover and clutch disc and flywheel referring
to "Clutch Cover, Clutch Disc and Flywheel Removal and
Installation" in Section 7C5.