Suzuki Wagon R Manual page 3868

(A)
1
4
7
2
Timing Chain and Chain Tensioner Removal
and Installation
Removal
1) Remove timing chain cover referring to "Timing Chain Cover
Removal and Installation" in this section.
2) Lock chain tensioner (1) inserting special tool.
Special tool
(A): 09919-58320
3) Remove camshaft sprocket bolts as follows.
a) Remove special tool from camshaft end.
5
Special tool
09919-58310
8
b) Remove camshaft sprocket bolts (7) with holding hexagonal
section.
c) Insert special tool to camshaft end.
3
Special tool
09919-58310
6
4) Remove sliding rail (2), guide rail (3), tension rail (4) and
camshaft sprockets (8).
5) Remove timing chain (5) with crankshaft timing sprocket (6).
6) Remove timing chain cover gasket.
7) Remove chain tensioner, if necessary.
Installation
1) Confirm that special tool (A) is installed to cylinder block and
special tool (B) is installed to camshafts.
If special tool(s) is removed, install special tool (A) referring
to "Camshaft Removal and Installation" and/or install special
tool (B) referring to "Crankshaft Removal and Installation" in
this section.
Special tool
(A): 09919-58310
(B): 09912-38310
2) Install chain tensioner, if removed.
ENGINE MECHANICAL (Z10XEP AND Z12XEP ENGINES) 6A4-41