Suzuki Wagon R Manual page 4014

1
"A", (a)
2
MANUAL TRANSAXLE (Z12XEP ENGINE MODEL) 7A5-37
3) Hold final gear (1) with soft jawed vise, install differential
case (2) and then tighten new bolts with thread lock cement
applied to specified torque.
"A": Thread lock cement 99000-32110
Tightening torque
Final gear bolt (a): 40 N·m (4.0 kg-m, 29.0 lb-ft), 30° and 15°
by the specified procedure.
CAUTION:
Main shaft and final gear must be replaced as a set when
either replacement becomes necessary.
4) Press-fit differential side bearings (right and left) (1) using
special tools and hydraulic press.
Special tool
(A): 09925-18330
CAUTION:
Do not mix differential side bearing outer races of left
and right sides.
5) Install differential assembly and differential bearing retaining
ring referring to "Transaxle Case Disassembly and Assem-
bly" in this section.
6) Install oil seal referring to "Differential Side Oil Seal Replace-
ment" in this section.