Suzuki Wagon R Manual page 3996

(A)
1
4
3
(A)
1
4
3
5
6) Remove 3rd & 4th selector fork pin (1) using special tool and
5
Special tool
2
(A): 09922-89810
CAUTION:
When removing selector fork pin, apply a piece of wood
(2) or the like to gear selector rod so as to protect it
against damage.
7) Remove 5th gear shift fork.
8) Remove 1st & 2nd selector fork pin (1), 1st & 2nd gear selec-
2
Special tool
(A): 09922-89810
2. A piece of wood
9) Remove reverse selector fork pin (1), reverse gear selector
(A)
1
Special tool
4
(A): 09922-89810
2
10) Remove gear shift rod detent pin No.2 (5).
3
2. A piece of wood
11) Remove main shaft (2) and drive shaft (5) from grooves of
a) Remove snap ring (3) using snap ring plier.
b) Reduce snap ring (1) using snap ring plier.
c) Remove main shaft (2), cluster gear (5) and reverse gear
MANUAL TRANSAXLE (Z12XEP ENGINE MODEL) 7A5-19
then pull out 3rd & 4th gear selector rod (3), selector fork (4)
and 5th gear shift rod fork (5).
tor rod (3) and selector fork (4) in the same manner as step
6).
rod (3) and reverse gear selector fork (4) in the same man-
ner as step 6).
extension bearing plate case (6) as follows.
(4) from extension bearing plate case (6).