Suzuki Wagon R Manual page 3656

Wheel bolt
Installation
For installation, reverse removal procedure, noting the flowing.
Wheel bolts must be tightened in sequence and to proper torque
to avoid bending wheel or brake disc, left figure.
Tightening order
"A" – "B" – "C" – "D":
Tightening Torque Specifications
Fastening part
NOTE:
Before installing wheels, remove any build-up of corro-
sion on wheel mounting surface and brake disc mount-
ing surface by scraping and wire brushing. Installing
wheels without good metal-to-metal contact at mounting
surfaces can cause wheel bolts to loosen, which can
later allow a wheel to come off while vehicle is moving.
Tightening torque
·
Wheel bolt (a): 110 N m (11.0 kg-m, 80.0 lb-ft)
N•m
110
WHEELS AND TIRES 3F-3
Tightening torque
kg-m lb-ft
11.0 80.0