Suzuki Wagon R Manual page 3646

FRONT WHEEL ALIGNMENT
WARNING:
Do not removal all of the wheel bolts at once, because all the wheels of this vehicle are mounted by
the wheel bolts.
Leave a bolt at least not to drop the wheel.
Support the wheel and/or tire and then remove the bolt(s) left with the wheel.
NOTE:
Refer to the same section of the Service Manual mentioned in the FOREWORD of this manual for all of
this section except the following.
• Tighten wheel bolt to 110 N·m (11.0 kg-m, 79.5 lb-ft) instead of 95 N·m (9.5 kg-m, 69.0 lb-ft) which is
instructed in the same section of the Service Manual mentioned in "FOREWORD" of this manual.
Tightening torque
Wheel bolt: 110 N·m (11.0 kg-m, 79.5 lb-ft)
SECTION 3A
FRONT WHEEL ALIGNMENT 3A-1
3A