Suzuki Wagon R Manual page 4032

3
6
Clutch disc
Measure depth of rivet head depression, i.e. distance between
rivet head and facing surface. If depression is found to have
reached service limit at any of holes, replace disc assembly.
Rivet head depth
Standard: 1.65 – 2.25 mm (0.0650 – 0.0885 in.)
Service limit: 0.5 mm (0.020 in.)
Flywheel
Check surface contacting clutch disc for abnormal wear or heat
spots. Replace or repair as required.
Clutch Release Mechanism Removal and
Installation
Removal
1) Remove clutch release fork bolt (1) and then drive out clutch
5
2
release shaft (2).
2) Remove release shaft bearing (3) and clutch release fork (4).
3) Drive out clutch release shaft No.1 bush (5) and clutch
1
release shaft No.2 bush (6) from transaxle case.
4
4) Remove cluster gear cover (1).
1
CLUTCH (Z12XEP ENGINE MODEL) 7C5-11