1
2
3
4
5
5) Install gear shift rod detent pin No.2 (4).
6) Install reverse gear selector rod (1) and selector fork (2) in
the same manner as step 4).
7) Install 5th gear shift rod fork (5).
3. Selector fork pin
8) Install 3rd & 4th gear selector rod (1) and selector fork (2) in
1
the same manner as step 4).
3. Selector fork pin
2
9) Install gear shift rod locking bushes using plastic hammer.
3
10) Engage 2nd, 3rd and 5th gear and install gear shift rod con-
nector (1) with specified torque.
1
2. Gear shift rod connector bolt
Tightening torque
Gear shift rod connector bolt (a): 7 N·m (0.7 kg-m, 5.0 lb-ft)
CAUTION:
2, (a)
Do not reuse gear shift rod connector bolt (2). Be sure to
use new adhesive pre-coated bolts. Otherwise, bolts may
loosen.
11) Install gear shift rod looking bushes (1) to extension bearing
plate case (2) using plastic hammer.
MANUAL TRANSAXLE (Z12XEP ENGINE MODEL) 7A5-21