Suzuki Wagon R Manual page 4074

DTC B3060 Incorrect Transponder Detected
DTC Detecting Condition and Trouble Area
DTC Detecting Condition
• FIX CODE does not match with registered one.
• FIX CODE is not registered in immobilizer control
module.
Troubleshooting
Step
1 Is DTC B3056 also output?
2 Check DATA LIST "FIX CODE (IGN KEY)".
Is it registered?
3 Register transponder referring to "How to Reg-
ister Ignition Key" in this section.
Check SUZUKI scan tool DATA LIST for "FIX
CODE (IGN KEY)".
Is it registered?
IMMOBILIZER CONTROL SYSTEM (Z10XEP / Z12XEP ENGINE MODELS) 8G4-19
Action
Trouble Area
• Unregistered ignition key with built-in transponder
• Ignition key with built-in transponder faulty
• Immobilizer control module
Yes
Proceed DTC Flow table
of DTC B3056.
Then go to Step 2.
Replace ignition key with
built-in transponder.
Then go to Step 3.
Transponder FIX CODE is
registered.
No
Go to Step 2.
Go to Step 3.
Transponder registration
procedure is not com-
pleted correctly.
Register ignition key
again.