Suzuki Wagon R Manual page 3606

Maintenance Service
Engine Accessory Drive Belt Inspection
(Z10XEP / Z12XEP Engines)
WARNING:
All inspection and replacement are to be performed with
ENGINE NOT RUNNING.
Inspect belt for cracks, cuts, deformation, wear, tension and
cleanliness. If any defect exists, replace.
Engine Accessory Drive Belt Replacement
(Z10XEP / Z12XEP Engines)
Replace belt with new one referring to "Accessory Drive Belt
Removal and Installation" in Section 6B4.
Engine Oil and Oil Filter Replacement
(Z10XEP / Z12XEP Engines)
WARNING:
• New and used engine oil can be hazardous.
Be sure to read "WARNING" in General Precaution in
Section 0A and observe what in written there.
• Step 1) – 6) outlined below must be performed with
ENGINE NOT RUNNING. For step 7), be sure to have
adequate ventilation while engine is running.
Before draining engine oil, check engine for oil leakage. If any evi-
dence of leakage is found, make sure to correct defective part
before proceeding to the following work.
1) Remove oil filter element.
a) Place oil collecting basin under filter.
b) Loosen and remove oil filter housing cover (1).
1
MAINTENANCE AND LUBRICATION 0B-7