Suzuki Wagon R Manual page 3532

Differential carrier and drive bevel pinion
A: Dummy height of pinion form dummy (= 40 mm/1.575 in.)
B: Radius of bearing form dummy with dummy shaft (= 36
mm/1.417 in.)
C: Block dummy thickness (= 4 mm/0.1575 in.)
A + B + C: Mounting distance adjusting dummy total size (= 80 mm/
3.150 in.)
D: Measured dimension
E: Drive bevel pinion mounting distance (= 80 mm/3.150 in.)
Special tool
(A): 09922-76120
(B): 09922-76230
(C): 09922-76140
(D): 09922-76410
(E): 09922-76340
(F): 09922-76150
(G): 09922-76320
(H): 09922-76510
7) Press-fit differential side bearings (3) to differential case (1)
by using special tools.
Special tool
(A): 09951-76010
(B): 09951-16060
2. Drive bevel gear
F: Shim thickness for mounting distance adjustment (= D)
1. Pinion form dummy
2. Bearing form dummy with dummy shaft
3. Block dummy
4. Dial gauge
5. Drive bevel gear
REAR DIFFERENTIAL 7F-11
6. Front bearing
7. Differential carrier
8. Rear bearing
9. Spacer
10. Drive bevel pinion