Programming Regular Polling - Muratec MFX-2530 Operating Instructions Manual

Advanced fax

Programming regular polling

Note: You cannot program continuous polling into a programmable one-touch key.
For more information on continuous polling, see page 3.35.
To program a regular polling operation into a programmable one-touch key:
1
Press , , [Enter].
MENU C
The shows the programmable one-touch
LCD
number list.
2
Select the programmable one-touch number
that you want to program or change.
Note: If you're changing a previously stored command:
If your previous command for this key was a polling transmission and
you want to keep this key programmed for a polling transmission, use
these instructions to make changes.
If you want to assign this key to a completely different operation,
overwrite a previously stored command to the new one.
3
Press [Enter].
4
Use the numeric keypad to enter the fax num-
ber exactly as your machine should dial it,
including whatever codes your phone system
requires. The number can be up to 40 charac-
ters in length.
5
Press [Enter].
6
Select "Polling" and press [Enter].
7
If you want the polling to begin immediately every time you press the key,
press [Exit] and skip to step 10.
If you want to delay the polling, select "Delayed Tx" and press [Enter].
3.56
All manuals and user guides at all-guides.com
C.Prog.One-Touch
Select p-one-touch.(79-84)
79:
80:
81:
82:
83:
Detail Erase
79:
Enter fax number.
_
- Clear
8
Next, tell your fax to carry out this delaye
Option 1:
Option 2:
Enter
9
Press [Enter], [Exit].
10
The machine will return to step 2.
Note: When regular polling is programm
Note: When the delayed transmission is
If you want to enter or change another key
Enter
If you do not want to enter or change any o
. Your machine returns to standby m
RESET
Perform the command once
certain time on a certain da
the month. (For example, "D
at 5:05 on the 30th.")
PM
To select this option, use the
numeric keypad to enter the
and time when the fax shou
Perform the command at a c
tain time each day you press
key. (For example, "Do this a
today.")
PM
To select this option, use the
numeric keypad to enter 0,
then the time the fax should
form the command.
the programmable one-touch num
appear in the programmable one-t