Setting Ecm - Muratec MFX-2530 Operating Instructions Manual

Adjusting the print settings
Default setting: Rx reduction rate: Normal, Reduction margin: 40 mm,
Paper saving:OFF.
1
Press , , 0, 2, [Enter].
MENU J
2
Select item you want to set using the cursor
key. Then press [Enter].
3
Select desired item and then press [Enter].
4
If you want to change other items, repeat step
2-3.
5
When you finish, press [Exit].
6
Press to return to the standby mode.
RESET
Setting the number of rings
Default setting: 2 time.
You can set how many times your fax machine will ring before answering a call.
Choose from 1 to 10 rings.
1
Press , , 0, 5, [Enter]. The
MENU J
2
Use the numeric keypad to enter the number of
rings you want, from 01 to 10.
Note: If you enter 00 (zero), the machine will
beep briefly to warn you that it can't
accept that setting.
3
Press [Enter] to save the setting.
4
Press to return to the standby mode.
RESET
All manuals and user guides at all-guides.com
02.Print Settings
Use cursor to select
item.
Rx Reduc.Rate:Normal
Reduc. Margin:40 mm
Paper Saving :OFF
Exit
05.Number of Rings
Set # of rings.
shows:
LCD
02 time.
# Of Rings : 2 time(01-10)
Setting
Default setting: ON.
"Line noise," or static on the line during a call, ca
from one fax machine to another.
That's why your fax machine gives you the optio
( ). When two fax machines communicate wh
ECM
machine automatically checks the data as it sen
verify the transmission, the first machine will re
Note: gives you a better chance of transm
Enter
ECM
phone line, but it could also slow down t
the line is, the slower the transmission.
turn
Note: Not all fax machines have
a fax machine not currently using
transmission from a usual, non-
1
Press
MENU
The
LCD
2
Select "On" or "Off" using the cursor key.
3
Press [Enter] to save the setting.
(01-10)
4
Press
RESET
Enter
ECM
on or off as needed.
ECM
. If you've
ECM
ECM
, , 0, 7, [Enter].
J
shows the current setting:
ECM
to return to the standby mod
, t
ECM
tran