Programming Regular Polling - Muratec MFX-1200 Operating Instructions Manual

Advanced features
18
Press . The asks if you want to send a cover page for this program-
ENTER LCD
mable one-touch number.
Cover Page :---
← ← / → → /Enter
19
Press until the mode you want appears.
20
Press . The asks if you want to turn the Fax & Copy feature on or
ENTER LCD
off for this programmable one-touch number.
Fax & Copy :---
← ← / → → /Enter
21
Press until the mode you want appears.
22
Press .
ENTER
23
Press to return your machine to standby mode.
STOP
3.40

Programming regular polling

To program a regular polling operation into a programmable one-touch key:
1
Press Program key, , 3, 0, 1,
A
grammable one-touch number available:
Select Program No.
P2:No Number Stored
Note: If P2 appears on the
LCD
number for P1. You can see what you programmed into P1 by press-
ing , if you want. For example, if you set P1 for storing of the polling
document, you will see:
Select Program No.
P1:Polling Document
Press to go back to the programmable one-touch key you want to
enter.
2
Press the key that you want to program or change. Here, we ve selected P2.
Select Program No.
P2:No Number Stored
Note: If your previous command for this key was for a polling transmission
and you want to keep this key programmed for a polling transmission,
use these instructions to make changes. But if you want to assign this
key to a completely different operation (for a delayed transmission, for
example), then you first must erase the stored command before pro-
gramming the new one.
Note: To erase a programmable one-touch key, see page 3.49.
3
If you want to select a different programmable one-touch key than the one
that appears on the , press that key now.
LCD
4
Press . The asks which operation you want to program into the pro-
ENTER LCD
grammable one-touch:
Type :Communication
← ← / → → /Enter
Note: If changing a previously stored command, skip to step 7.
5
Press until Communication appears.
Type :Communication
← ← / → → /Enter
. The shows the first empty pro-
ENTER LCD
, it means that you have already entered a