Settings For Operation; Adjust The Monitor Speaker's Volume; Panel Auto Reset Time; Printing Your Fax Settings - Muratec MFX-2530 Operating Instructions Manual

Fax settings

Settings for operation

Adjust the monitor speaker's volume

Default setting: Medium.
You can set the volume of the monitor speaker, assuring that on-hook dialing will be
as loud (or as soft) as you require.
1
Press /
MONITOR CALL
Important: If you don't hear a dial tone, make sure your fax machine is
plugged into a working phone line.
2
If the volume you hear is satisfactory, skip to step 4.
Otherwise, proceed to step 3.
3
Adjust the volume as you wish:
To turn the volume up, press .
To turns the volume down, press .
The LCD indicates the volume.
4
Press /
MONITOR CALL

Panel auto reset time

Note: Default: After three minutes
The machine returns to its initial condition automatically after a certain period of
time. You can change this time from 1 to 10 minutes.
Note: The machine first resets the
resets the key settings to the initial condition.
1
Press , , 1, 7, [Enter].
MENU J
2
Enter the time to auto resetting, and then
press [Enter] to save the setting.
3
Press to return to standby.
RESET
3.76
All manuals and user guides at all-guides.com
on the control panel. You now should hear a dial tone.
Tel Mode
Volume Setting
again to hang up.
display, and after certain period of time it
LCD
17.Fax Panel Reset
Fax Panel Reset
After 03 min.
Fax Panel Reset : 3 min.
Use cursor to adjust
monitor volume.
OFF Low Medium Loud
-----------------------
<- -> Enter
(1-10)
Enter

Printing your fax settings

After you've programmed settings into your mac
We recommend this, particularly if you're sharin
who might change the settings.
With this list, you can quickly confirm that all o
having to go back and check them on the machin
someone else's changes, this list guides you in re
preferred settings.
Note: Please refer to the index at the end of th
settings you don't recognize or understa
To print the settings list:
1
If the machine is in Fax mode, proceed to
If it is in Copy mode, press
2
Press , , [List].
MENU J
Printing a program list
Your machine can also print a program list. This
fax machine and the keystrokes needed to compl
Note: Please refer to the index at the end of th
settings you don't recognize or understa
To print a program list, press
to change
FAX
, *, 8.
MENU